User`s guide

Security
Polycom, Inc. 8–13
General Settings>Security>Whitelist
Enable Whitelist Enabled Read Only Enabled Yes
General Settings>Security>Account Management
Admin Account/Lock Account after Failed Logins 3 1-10 3 1-10
Admin Account/Account Lock Duration in Minutes 1 1-480 1 1-480
User Account/Lock Account after Failed Logins 3 1-10 3 1-10
User Account/Account Lock Duration in Minutes 1 1-480 1 1-480
Failed Login Window
Note: Configurable only through the
‘loginwindowduration’ API command.
11-24Off1-24
General Settings>Security>Remote Access Settings
Idle Session Timeout in Minutes 10 1-180 10 1-180
Maximum Number of Active Web Sessions 25 10-50 25 10-50
Max Number of Sessions Per User 3 1-5 3 1-5
Lock Port after Failed Logins 3 2-10 3 2-10
Port Lock Duration in Minutes 1 1-480 1 1-480
General Settings>Security>External Authentication
Enable Active Directory Authentication Enabled Yes Disabled Yes
General Settings>Serial Port
RS-232 Mode Off Off or Control
Only
Off Off or Control
Only
Network>IP Network
Enable SIP Disabled Read Only Disabled Yes
Transport Protocol TLS Read Only TLS Read Only
Enable Network Intrusion Detection System (NIDS)
Note: Controlled only through the Security Mode setting’s
“Auto” option, which means this setting is enabled when
Security Mode is enabled.
Auto (Enabled) Read Only Auto (Enabled) Read Only
Cameras
Far Control of Near Camera Disabled Yes Disabled Yes
Global Services>Directory Servers
XMPP
Note: Controlled only through CMA or RealPresence
Resource Manager system provisioning.
Disabled Read Only Disabled Yes
LDAP Disabled Yes Disabled Yes
Global Services>Calendaring Service
Enable Calendaring Service Disabled Read Only Disabled Yes
Admin Settings Area/Setting
Maximum
(was DoD/DSN)
High
Value Configurable Value Configurable