User`s guide

Security
Polycom, Inc. 8–11
Using the Maximum or High Security Profile
The following table shows the default values for specific Admin settings when
you use the Maximum or High security profile. With the Maximum or High
security profile, Security Mode is enabled and cannot be disabled.
Admin Settings Area/Setting
Maximum
(was DoD/DSN)
High
Value Configurable Value Configurable
General Settings>System Settings
Call Settings
Auto Answer Point to Point Video Disabled Yes Disabled Yes
Auto Answer Multipoint Video Disabled Yes Disabled Yes
Call Detail Report Enabled Read Only Enabled Yes
General Settings>Home Screen Settings
Availability Control Enabled Read Only Enabled Read Only
Button (1-6): Recent Calls Disabled Read Only Disabled Yes
Place a Call/Last Number Dialed Disabled Read Only Disabled Yes
General Settings>Security>Security Settings
Security Profile Maximum During Setup
Only
High During Setup
Only
Security Mode Enabled Read Only Enabled Read Only
Use Room Password for Remote Access Disabled Read Only Disabled Yes
Require Login for System Access Enabled Read Only Enabled Yes
AES Encryption Required- Video
Calls
Yes Required- Video
Calls
Yes
Enable Remote Access: Web Enabled Yes Enabled Yes
Enable Remote Access: Web access port 443 Read Only 443 Read Only
Enable Remote Access: Telnet Disabled Read Only Disabled Read Only
Enable Remote Access: SNMP Disabled Read Only Disabled Read Only
Allow Video Display on Web Disabled Read Only Disabled Read Only
Enable Sessions List
Note: Forced to “enabled” when External ADS
Authentication is enabled.
Enabled Read Only Enabled Read Only
General Settings>Security>Password Settings
Admin Room, User Room, Remote Access, Meeting
Reject Previous Passwords 10 8-16 10 Yes
Minimum Password Age in Days 1 1-30 Off Yes
Maximum Password Age in Days 60 30-180 90 Yes
Password Expiration Warning in Days 7 1-7 4 Yes
Minimum Changed Characters 4 1-4 4 Yes