User`s guide

Administrator’s Guide for Polycom HDX Systems
8–6 Polycom, Inc.
Configuring Admin ID and Password for the Polycom Touch Control
You can set an Admin ID and password, which allows you to limit access to
the Polycom Touch Control Administration settings.
NTLM Version Specifies the authentication protocol for use with Microsoft
Office Communications Server or Microsoft Lync Server,
LDAP directory, and Polycom Converged Management
Application (CMA) or Polycom RealPresence Resource
Manager system connections. If set to Auto, the system
first tries NTLMv2, and if NTLMv2 fails it tries again with
NTLMv1.
Enable Sessions
List
Allows you to see a list of IP addresses that are logged in to
your HDX system.
Enable Security
Banner
Specifies the security banner to display.
•Off — Disables the security banner.
•Custom — Allows you to enter text to use for the
banner.
•DoD — Specifies that the system displays a default U.S.
Department of Defense security banner. You cannot
view or change this text on the local interface, but you
can change the text on the web interface.
Banners can be displayed on the Login screen and the
web’s Security Banner window.
The following is an example of banner text:
This machine is the property of Polycom, Inc., and its
use is governed by company guidelines. You have NO
right of privacy when using this machine.
Note: The security banner is not supported with the
Polycom Touch Control.
Local System
Banner Text
If you enable the security banner on the web interface, enter
up to ten lines of text, each of which can contain up to 128
single-byte characters. The lines of text run together in
paragraph format when they appear on the local system.
If you enable the security banner on the local interface, the
ten lines where you enter text are displayed below the
Enable Security Banner field. The local interface does not
have a Local System Banner Text field.
Note: The security banner is not supported with the
Polycom Touch Control.
Remote Access
Banner Text
This field is visible only when you use the web interface.
You can type or paste a maximum of 1,600 characters.
Setting Description