User`s guide

Administrator’s Guide for Polycom HDX Systems
8–4 Polycom, Inc.
Admin Remote
Access Password
Specifies the password for administrator access when
logging in to the system remotely using the web interface or
a telnet session.
When this password is set, you must enter it to update the
software or manage the system from a computer. The
password cannot contain spaces or more than 40
characters.
Require Login for
System Access
Specifies whether the system automatically prompts users
to log in when the system comes out of sleep mode.
Enabling this setting requires a login to use the local
interface.
User ID Specifies the ID for the user account.
User IDs are not case sensitive.
User Room
Password
Specifies the password for user access when logging in to
the system locally.
When this password is set, you must enter it to access the
system using the remote control. The password cannot
contain spaces or more than 40 characters. Passwords are
case sensitive.
User Remote
Access Password
Specifies the password for user access when logging in to
the system remotely. This setting is only available when
Security Profile is set to Maximum.
When this password is set, you must enter it to access the
system from a computer. The password cannot contain
spaces or more than 40 characters. Passwords are case
sensitive.
Enable Remote
Access
Specifies whether to allow remote access to the system by:
• Web
• Telnet
• SNMP
You may select any of these, or any combination of them.
Note: The system restarts if you change the remote access
settings. This setting does not deactivate the associated
port, only the application. Use Web Access Port to disable
the port.
When the Polycom HDX system is paired with a Polycom
Touch Control, web remote access must be enabled.
Setting Description