User`s guide

Security
Polycom, Inc. 8–3
2 Configure these settings on the Security screen:
Setting Description
Security Profile If set to Maximum, the Security Profile sets and controls
particular security settings in order to meet very high
security requirements, such as for government
environments. The Security Profile setting can be changed
only in the setup wizard.
Security Mode Specifies whether the system uses Security Mode, which
prevents unsecured access to the system. Every time you
enable Security Mode, you must configure a new password
for the system. The Security Mode setting is enabled by
default for the Maximum and High security profiles and
cannot be changed. The setting can be changed for
Medium, Low, and Minimum security profiles.
Use Room
Password for
Remote Access
Specifies whether the room password used for local login is
also used for the remote login.
Meeting Password Specifies the password users must supply to join multipoint
calls on this system if the call uses the internal multipoint
option, rather than a bridge.
The meeting password cannot contain spaces or be more
than 40 characters.
Do not set a meeting password if multipoint calls will include
audio-only endpoints. Audio-only endpoints cannot
participate in password-protected calls.
If there is a meeting password configured for a multipoint
meeting hosted on a Polycom HDX system, Microsoft Office
Communicator clients cannot join the meeting.
Admin ID Specifies the ID for the administrator account. The default
Admin ID is
admin .
Admin IDs are not case sensitive.
Admin Room
Password
Specifies the password for administrator access when
logging in to the system locally.
When this password is set, you must enter it to configure
the system Admin Settings using the remote control. The
password cannot contain spaces or be more than 40
characters. Passwords are case sensitive.
The default Admin Room Password is the 14-digit system
serial number from the System Information screen or the
back of the system.
When the Polycom HDX system is paired with a Polycom
Touch Control, you do not need to supply a room password.