User`s guide

Administrator’s Guide for Polycom HDX Systems
6–12 Polycom, Inc.
To configure the Microsoft Office Communications Server or Microsoft Lync
Server directory settings:
1 Do one of the following:
— In the local interface, go to System > Admin Settings > Network > IP
> SIP Settings (select if necessary).
— In the web interface, go to Admin Settings > Network > IP > SIP
Settings.
2 Configure the SIP settings as described in Specifying SIP Settings on
page 2-15.
3 Do one of the following:
— In the local interface, go to System > Admin Settings > Global
Services > Directory Servers (select if necessary) and select the
Edit button to the right of Microsoft Lync Server 2010.
— In the web interface, go to Admin Settings > Global Services >
Directory Servers and select Microsoft Lync Server 2010.
4 Configure these settings on the Microsoft Lync Server 2010 screen.
Authentication
Type
Specifies the protocol used for authentication with the LDAP
server: NTLM, BASIC, or Anonymous.
Use SSL
(Secure Socket
Layer)
Enables SSL for securing data flow to and from the LDAP
server.
Domain Name Specifies the domain name for authentication with the LDAP
server.
User Name Specifies the user name for authentication with LDAP server.
Password Specifies the password for authentication with the LDAP
server.
Note: On the web interface, this field is named NTLM
Password.
LDAP Setting Description
Setting Description
Registration
Status
Indicates whether the system is successfully registered with
the Microsoft Office Communications Server or Microsoft Lync
Server.
Note: This setting is read only.
Domain Name
(web only)
Indicates the Domain Name entered on the SIP Settings
screen.