User`s guide

Administrator’s Guide for Polycom HDX Systems
3–36 Polycom, Inc.
3 Press and hold a number to store the preset position.
To store a double-digit preset (10-99), hold the second number down.
Any existing preset stored at the number you enter is replaced.
To delete all presets on a Polycom HDX 9000 series, Polycom HDX 8000 series,
Polycom HDX 7000 series, or a Polycom HDX 6000 series system:
1 If a call is connected, press Near to choose a near-site video source.
2 Press Preset on the remote control.
3 Press and hold Delete to delete all presets.
To delete all presets on a Polycom HDX 4000 series:
1 Press Near on the keypad.
2 Press and hold Delete to delete all presets.
Setting and Using Presets with the Polycom Touch Control
To move the camera to a stored preset:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to select either near-site or far-site
control.
3 Touch View Presets.
4 Touch a number to go to a saved preset.
To view your near-site presets:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to select either near-site or far-site
control.
3 Touch View Presets.
Icons for presets 0-9 are shown on the screen. Solid preset icons indicate
stored camera positions. Transparent icons indicate unassigned presets.
To store a preset:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to choose a near-end or far-end
camera.