User`s manual

User’s Manual
GSM35 11 RTD Finland Oy
Factory-Configured Jumper Settings
Table 2-1 below illustrates the factory jumper setting for the GSM35.
Figure 2-1 shows the board layout of the GSM35 and the locations of the
jumpers. The following paragraphs explain how to change the factory
jumper settings to suit your specific application.
Table 2-1 Factory configured jumper settings (Please see figure 2-1 below
for more detailed locations)
JUMPER NAME DESCRIPTION NUMBER OF JUMPERS FACTORY SETTING
BASE Base Addresses 6 2E8 / 6E8
IRQ Host interrupts 11+1 5, G – jumper closed
Fig. 2-1 GSM35-1 Board layout showing jumper locations