User manual

BESTip ATA GSM User Manual

Chapter 3: Setup

After connection, follow the easy instructions to setup the

BESTip ATA GSM. You can establish your setup or modify it at

any time by launching the BESTip.

Make sure the BESTip is well connected and you must allow

the BESTip to finish booting before you enter the setup mode.

Entering Setup Mode

1. After switching on, the BESTip

will start self-testing, and the LCD

screen will display as shown right.

2. After finishing initializing, the

system will start up DSP.

3. For the first time, the LCD will

display Enter Setup Mode - Push

Down=Yes. Press button

on the front panel to enter setup

mode.

Note: At the BESTip finishes booting, you can always use

or buttons to scroll the menu and press button

to enter the current menu.

BESTip ATA GSM User Manual

1. You can press “DOWN” button at standby status to enter main

menu.

2. Then, you can press “NEXT” or “BACK” button to scroll the menu.

Press “Down” button

to enter main menu.

Press “NEXT” button

to scroll the menu.

Press “BACK” button

to scroll the menu.