User manual

BESTip ATA GSM User Manual
27
3. Keep pressing until you
see Mobile Pincode.
4. There are 2 options for Mobile
Pincode Application: ON or OFF
5. Press button to save
configuration data in memory
For mobile pincode usage, caller will hear "beep-beep" tone
when the ATA GSM answers in-coming call. It requests caller to
enter mobile pincode number.
Please dial " #11*pincode# " to sign in. If the pincode is good,
the caller will hear dial-tone, so caller can dial international
number as usual.
Caller can make multiple calls one after one, just press " ### "
quickly to end the current call, then dial-tone will come out to
notify that the device is ready to accept next call.
For sign out after last call, please dial “ #22# " or just hang-up
the call, it will sign out automatically after 8 seconds for ATA
GSM.
Function Select－GSM Setting
This section will show you the steps to help you setup the GSM
Setting of your BESTip ATA GSM.
1. Press button to enter the
Function Select Mode.
BESTip ATA GSM User Manual
28
2. Press or button to
scroll the main menu till it appears
Function Select - GSM Setting. And
then press to enter the
option.
3. Press to enter GSM
Pincode #. Enter the GSM PIN # to
activate the SIM card.
4. Press to enter Outward
Password. Enter the password for
calling out.
5. Press to enter
Termination GW. Normally set to
“OFF”.
6. Press to enter GSM
Callback. Normally set to “OFF”.
7. Press to enter Hotlin.
Normally set to “OFF”. If you turn
hotline function, please be advised
this function should be collocated with
the setup on ITSP platform. Please
contact our local dealer for setup
hotline function.
Function Select－Inward Password
It is recommended of setting inward password in case that
unauthorized person steals the lines. However in some regions
and PBX systems, there exists different tone mode. Please
consult your retailer for further information.