User manual

BESTip ATA GSM User Manual
25
6. 2nd IDD Prefix: Please key in
the second International Direct Dial
code. This option is needed for
some Caribbean Sea countries.
Keep this option blank if it is not the
case.
7. DDD Prefix: Please key in the
Domestic Direct Dial prefix code.
“0” in most cases.
8. Mobile Pincode: Turn it on
unless you have applied for
business use. See “Mobile Pincode”
in this chapter.
9. Play Volume: The default value
is 0dB. You can set from -31dB to
31dB. 0 dB is suitable for most
cases. Please don’t make it too big
or too small.
10. Record Volume: The default
value is 0dB. You can select from
-31dB to 31dB. 0 dB is suitable for
most cases. Please don’t make it
too big or too small.
11. Show CDR: Turn it on and
CDR will show on the display after
call finished.
12. LCD Contrast: The default
value is 0. The adjustable range is
from +5~-10.
BESTip ATA GSM User Manual
26
13. Network Testing: Normally set
to “OFF”. You can turn on to test
your network.
14. Press button to save
configuration data in memory
15. It will return to standby state
again after updated. Please restart
the device to make setup changes
effective.
Mobile Pincode
“Mobile Pincode” function is applied for business purpose.
Customer can buy "Mobile Pincode Card " from our authorized
agent and "Mobile Pincode Card" is just like so-called "Pre-Paid
Calling Card". The card can be used on any BESTip
devices anywhere and credits consumed is deducted from the
card. The device is simply a tool for calling out. Please contact
our agent for further information about “Mobile Pincode Card“.
Mobile Pincode Setting
1. Press button to enter the
Function Select Mode.
2. Press or button to
scroll the main menu till it appears
Function Select - System Setting.
And then press to enter the
option.