Specifications

TC35 / TC37 Hardware Interface Description
TC35_37_HD_02_V03.10 - Released Page 73 of 92 21.12.2001
5.5.3 Antenna pad and coaxicon connector on TC37
TC37 comes with a gold plate antenna pad and a coaxicon switching connector. Both
options can be used alternatively as described in Chapter 4.3.
Figure 38: Dimensions and position of coaxicon connector and antenna pad on TC37
Coaxicon switching connector
The coaxicon switching connector used on TC37 is made by AMP. Figure 27 and Figure 38
show the physical dimensions of the connector and its position on the TC37 board.
Appropriate accessories, such as cables, cable plugs and a special crimping tool can be
obtained from Tyco Electronics. To give you a first idea, AMP assembly drawings are
included in the Appendix. Up-to-date specifications are posted on the website of AMP Tyco
Electronics, e.g. under http://www.amp.com/. To select matching equipment use the
following ordering information:
Table 25: Ordering information for antenna equipment from AMP Tyco Electronics
AMP Tyco product name AMP Tyco part number
COAXICON* Series Mobile Phone, Front Contact Cable Plug 619028-1
Antenna pad
The position and dimensions of the antenna pad can be gathered from Figure 27and Figure
38. To fasten the antenna it is recommended to use gold plated contact springs. Soldering
must be strictly avoided to prevent damage from the pad. Keep the contact surface clean.