Specifications

TC35 / TC37 Hardware Interface Description
TC35_37_HD_02_V03.10 - Released Page 72 of 92 21.12.2001
5.5.2 Using antenna eqipment from other manufacturers
For your product to meet individual design or technical requirements, you may decide to
choose antenna equipment from suppliers other than MuRata.
When selecting a suitable antenna your considerations should also include the requirements
of electromechanical valence. To achieve best performance it is essential to minimize the
valence potential delta levels of dissimilar metal mating surfaces. Therefore the material of
the antenna cable plug must be compatible with the material of the GSC receptacle on the
GSM engine, i.e. it should belong to the same group in the electromechanical series. The
material of the GSC connector on TC35 in specified in Table 23.