Specifications

TC35 / TC37 Hardware Interface Description
TC35_37_HD_02_V03.10 - Released Page 64 of 92 21.12.2001
5.3.2 Mounting TC37
Caution: The antenna pad of TC37 is located close to the mounting hole. If you
connect your antenna to the pad only insert an insulated (nylon) screw, or
rather leave the hole open while using a clamp or clip to secure TC37 onto the
host device.
Figure 29: Mounting TC37 (example)
Shielding cover
RF part
Antenna pad
Mounting hole (avoid using this
hole if antenna connects to pad)
Switching connector
Mounting hole
Long mounting hole
Shielding cover
baseband part
ZIF connector