User guide

Variables:
1. Total Msg Request Count – Total Number of Messages Received from the BACnet/IP Client.
2. Read Property Request Received – Number of Read Property requests received from the
BACnet/IP Client.
3. Read Multiple Property Request Received – Number of Read Property Multiple requests
received from the BACnet/IP Client.
4. Write Property Request Received – Number of Write Property requests received from the
BACnet/IP Client.
5. Write Property Multiple Request Received – Number of Write Property Multiple requests
received from the BACnet/IP Client.
6. Total Msg Response Count – Total Number of Messages sent to the BACnet/IP Client.
7. Read Property Response Sent- Number of Read Property Responses sent to the BACnet/IP
Client.
8. Read Multiple Property Response Sent – Number of Read Property Multiple Responses sent to
the BACnet/IP Client.
9. Write Property Response Sent – Number of Write Property Responses sent to the BACnet/IP
Client.
10. Write Multiple Property Response Sent – Number of Write Property Multiple Responses sent to
the BACnet/IP Client.
11. Error Response Count – Total Number of Read/Write Errors Received.
12. Timeout Response Count – Total Number of Read/Write Timeouts.
13. COV Success Count – Total Number of Successful COV Messages.
14. COV Error Count – Total Number of COV Error Messages.
Common Error Strings:
1. BS: UNHANDLED_MSG_TYPE – The gateway received a BACnet/IP message that it doesn’t know
how to process.
2. BS: Message Abort - The gateway aborted a message due to one of the common reasons below:
a. “Buffer Overflow” – The BACnet/IP Client is asking for too much information in a single
message.
b. “Invalid ADPU” – The gateway is not able to process the message, try again later.
c. “Preempted by Higher Priority” – The BACnet/IP Client message has aborted due to a higher
priority task, try again later.
d. “Segmentation Not Supported” – The gateway does not support segmentation. Break up
the Client request into multiple requests.
3. BS: Message Reject - The gateway rejected a message due to one of the common reasons
below:
a. “Buffer Overflow” – The BACnet/IP Client is asking for too much information in a single
message.
b. “Invalid Parameter Data Type” – This BACnet/IP data type is not supported.
Real Time Automation, Inc. 53 1-800-249-1612