User guide

BACnet/IP Server Object Configuration – Group Names
Click the Set Up BACnet Names, Units, and COV button at the bottom of the Advanced BACnet/IP
Server Configuration page.
When in Auto-Server Mode, these fields are not configurable.
The Group Name is designed to be used when there are multiple BACnet/IP objects that have the same
name. This is useful when you have multiple, identical devices connected on the other protocol.
Follow these steps to configure the Groups in Manual Mode.
1) Select Group Name from the upper left dropdown menu.
2) For each Group Name used in the previous setup, change the name to your desired text. Any
names not used do not need to be changed or configured.
Real Time Automation, Inc. 23 1-800-249-1612