User manual

LOGO Mobile Phone User Manual

___________________________________________________________

____________________________________________

6.5 Virtual Keypad

The LOGO Mobile Phone has no alphanumeric keypad. If conditions, like a very noisy environment,

prevent the use of the voice recognition, and the number needing to be called has not been previously

recorded in the phone, the LOGO has a virtual keypad that can be used to enter the number. To

access the Virtual Keypad press the OK key from the main screen. The screen will change to the

Virtual Keypad as an alternative to voice input for entering phone and other number sequences

required by various functions. Follow the on screen instructions. Press the Up and Down scroll keys to

navigate the keypad. Pressing and holding down a scroll key for about 2 seconds will transition

between the upper and lower tables for faster use. The “Delete” soft key will erase the last entry if a

mistake is made. When the complete number has been entered, press the “Save” soft key if you want

to enter the number in the Phonebook with a voice tag. If you want to dial, simply press the “Send” key

to dial the number.

6.6 Making a Call

There are 5 ways to originate a call with the LOGO Mobile Phone.

1. Speaking the desired digits

2. Speaking a name recorded as a voice tag in the Phonebook

3. Selecting a number from the Call Register

4. Selecting a number by browsing the entries in the Phonebook.

5. Accessing the Virtual Keypad and entering the desired number.

Press the Red END key to end or cancel a call.

6.7 Using the Voice Recognition Function

The LOGO Mobile Phone is designed to be easily operated with its embedded voice recognition

software. As described above the handset must be trained to recognize the user’s voice. After

completing the voice recognition training, a call can be placed by pressing the Green SEND key. The

handset will respond with “Say a Command”. In order to place the call by speaking the digits,

respond with the Command “Call” and then follow the dialing prompts. To make a call using the

Phonebook respond with the Command “Phonebook” and when prompted say the name that has been

recorded as a voice tag associated with the desired number. Confirmation of the desired number is

done by pressing the OK key or by saying “Yes” (depending on the confirmation setting; see Settings

menu).

6.8 Answering an Incoming Call

If incoming call number identification service is available from the wireless carrier and the incoming

number is stored in the handset’s Phonebook, the incoming number will be displayed on the screen

and the voice tag associated with the number in the Phonebook will be announced. To answer the call,

press the Green SEND key or left soft key. To reject the call, press the Red END key or right soft key.

6.9 Turning on the Speaker

The LOGO is equipped with a small loud speaker to allow use of the phone when holding it in front of

your face. The speaker can be turned on by pressing the left soft key “Options” during a call. It can