User manual

LOGO Mobile Phone User Manual
___________________________________________________________
____________________________________________
© 2010 Real Phone Corporation. All Rights Reserved. PAGE 13
7.5 Settings
The Settings menu allows the user to set the parameters for numerous functions and conditions of the
handset. By utilizing the settings the users can tailor the handset’s operation in the most convenient way
for their particular use.
7.5.1 Phone Settings
Display Settings
LCD Contrast: Sets the contrast of the display screen, press up and down keys to adjust.
Back Light: Sets the duration of the display backlight to 15 or 30 seconds, or “Always On.”
In the “Always On” condition the battery drain will be much greater.
Wallpaper: Selects one of the two available display backgrounds.
Date & Time Display: Set or cancel the display of the date and time on the home screen.
Security Settings
Use this menu to select security options to avoid the handset or SIM card from being used if the
handset is lost or stolen. Many SIM Cards do not have PINs
Power On PIN1:
On: If the Power On PIN1 is set to “On”, the PIN1 Code will be required every time the handset is
powered on.
Off: If the Power On PIN1 Is set to “Off”, no PIN1 Code is necessary for handset operation. To
change this setting from “On” to “Off” the PIN1 code will need to be entered.
Change PIN1: If you want to change the initial PIN1 code, Select Change PIN1, and input the correct
initial PIN1 code. The phone will prompt the new PIN1 code for two times and then prompt whether
the change was successful. The PIN1 code can be changed only when the PIN1 code is set to “On”.
If it is set to “Off”, this function is disabled.
Please note that if a wrong PIN1 code is entered three times in sequence, the SIM card will be locked. A PUK
code will then be needed to unlock the SIM card. The PIN1 code and the PUK code may be provided with the
SIM card. If not, please contact your network operator. PIN Codes are not generally used with wireless
carriers in the United States.
Phone Code
This function will Lock or Unlock the handset. If set to “On”, “ Verify When Power-On” or “Verify With New
SIM” can be selected. The default phone lock code is “0000”.
Clock Settings
Date & Time Settings: Press the up and down keys to set the time and date.
Date Display Format: Used to select the date format.
Date Separator: Used to select the date separator format
Time Display Format: Used to select a 12 or 24 hour format