User manual

LOGO Mobile Phone User Manual

___________________________________________________________

____________________________________________

7.2.3 Voice Mail

Voice Mail is a feature offered by the wireless carriers. If Voice Mail is offered by the carrier providing

the SIM Card in your Phone then refer to their instructions for setting up and using the voice mail service.

Listen to Voice Mail: This function allows the handset to directly access the carrier’s voice mail system.

Voice Mail Edit: This menu is used to set up the Voice Mail service. The user may enter the Voice

Mailbox Number ( this is usually the handset’s own number or a number specified by the carrier) and a

Password.

7.2.4 Message Setup

Service Center: This function is used to store the SMS Service Center number. This number may

be embedded in the SIM Card. If not it must be obtained from the network

operator.

Status Report: Enables or disables the reporting of message details.

Reply Path: Enables or disables the Reply Path function.

Storage Status: The total capacity of inbox and outbox is determined by the capacity of SIM card

7.2.4 Delete All

This function is used to delete all messages in the inbox or outbox

7.3 Phonebook

The LOGO Mobile Phone’s Phonebook can contain up to 50 phone numbers with an associated recorded

voice tag for easy identification. The LOGO can also access entries from the SIM Card Phonebook that

were created while the SIM Card was in another handset. The Phonebook menu has the following functions:

USEFUL TIP – Name Dialing is the fastest way to dial a call from the LOGO Mobile Phone.

7.3.1 Browse Voice Tags

Select “Browse Voice Tags” menu to display the numbers and hear voice tags associated with each

number as you scroll through the list in the phone book.

7.3.2 Create Entry

Entries can be created in the Phonebook in four ways:

 From Call Register

 From Voice Dial

 From SIM Phonebook

 From Virtual Keypad

To create a new Phonebook entry from the Call Register, press “From Call Register” at the Create

Entry screen. Select the Call Register entry by using the Up and Down scroll keys and pressing the