Manualshelf

Spec Sheet 1

ManualsBrandsReal Fyre ManualsFireplace/Gas Stove AccessoriesVented Collection PB-24A 24" Pan Burner with Flat Burner Pan Provides Full Flame, Connector Kit and Damper Clamp in Black
12345678910
2
L-A2-226
REV 5 - 1508171425
TABLE OF CONTENTS
TABLE OF CONTENTS
Tools Recommended
The following tools and supplies may be needed to
assemble, install, and test the Real-Fyre
®
gas burner system:
1. Adjustable open-ended wrench 8" - 10"
2. Pipe wrench 8" - 10"
3. Pliers
4. Tefl on tape or pipe compound resistant to propane gas
5. Small Phillips-head screwdriver & fl at-head screwdriver
6. Leak detector or soapy water solution & brush to test
for gas leaks
7. Work gloves
Other tools used for plumbing or gas appliance installation
may be necessary.
WARNING
Improper installation, adjustment, alteration, service,
or maintenance can cause injury or property damage.
Refer to this manual. For assistance or additional
information, consult a qualified installer, service
agency, or the gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other fl ammable
vapors and liquids in the vicinity of this or any other
appliance.
3 PARTS LIST
4 IMPORTANT INFORMATION
4 FIREPLACE REQUIREMENTS
5 GLASS / GEMS QUANTITY DETERMINATION
6 INSTALLATION
6 INSTALLING THE BURNER
8 GLASS / GEMS PLACEMENT
8 BURNER PREPARATION
9 OPERATING INSTRUCTIONS
10 CLEANING AND MAINTENANCE
10 MAINTENANCE
10 CLEANING
10 SERVICE
10 FLAME DESCRIPTION
11 PILOT BURNER ADJUSTMENT (IF EQUIPPED)
12 NOTES PAGE
13 OPTIONAL CONTROLS FOR YOUR REAL-FYRE
®
BURNER SYSTEM
14 TROUBLESHOOTING
16 WARRANTY