Owner`s manual

8
No. L-A2-17506
REV 3 - 0603021604
Figure 12
Woodland
Oak
Split Oak
Designer
Plus
Royal
English Oak
Designer
Be sure to provide a minimum of 3” between the
front and rear log (Figure 11). This will create the
energy effi ciency and heat radiating effect of the log
set and will also reduce carbon buildup.
4. Top logs should be placed diagonally with space
between the logs so that the fl ames are not choked
off. Top logs may be moved to achieve the desired
fl ame pattern. Some carbon buildup (sooting) may
be observed where the fl ames impinge on the logs.
Unless the sooting is excessive, this should not
be a concern. If sooting is excessive, rearrange
the top logs so there is less fl ame impingement.
Examples of log stacks are shown in Figure 12.
The beauty and design of your Real-Fyre gas logs
are the result of skilled craftsmanship, research and
engineering. The fi ne quality materials used to mold
the logs are formulated from kiln-fi red ceramics,
superior refractories and the best expanded shales
and aggregates, exactly proportioned. Added to this
material are steel reinforcing rods, precisely sized and
designed to prevent breakage. This creates realistic,
long-lasting logs. Their durability has been proven by
over a half century of use in family homes. Real-Fyre
logs are guaranteed for as long as you own them.
Hairline cracks are common and may appear after the
fi rst use. This will not affect the integrity of the logs
or the operation.
Each log is skillfully designed and crafted to duplicate
natural wood. Deep, rugged bark textures and hand-
painted highlighting challenges the viewer to tell
whether they’re looking at real wood logs or Real-Fyre
logs. Knotholes, branch stubs and peeled-away bark
in many styles also add to the realism of your Real-
Fyre gas log set.
Designer and Classic Series Log
Placement
(for Charred Series log sets see page 9).
1. Log placement is very important for the proper
operation and performance of your Real-Fyre
gas log set. Although you have some fl exibility in
the log arrangement, it is necessary to follow the
log placement instructions carefully to fully enjoy
your log set.
2. The longest log is placed on the front of the grate
with the bark of the log facing forward. If you have
a heat chamber built into your log style, it should
be facing the rear of the fi replace (Figure 10).
3. The second longest log (Item No. 2) is placed on
the rear of the grate with the bark of the log facing
forward. If you have a heat chamber built into your
log style, it can face forward or to the rear of the
fi replace as you desire.
PLACEMENT OF REAL-FYRE GAS LOGS
FRONT
LOG
REAR
LOG
BACK
WALL OF
FIREPLACE
3”
GRATE
FRONT
LOG
BACK
WALL OF
FIREPLACE
STABILIZER
CLIPS
BURNER PAN
Figure 10
Figure 11
R
E
F
E
R
E
N
C
E