Manualshelf

Spec Sheet 1

ManualsBrandsReal Fyre ManualsFireplace/Gas Stove AccessoriesVent-Free Collection G19A-24/30-01V 24" and 30" Unvented Burner System with Clean Dazzling Flame Pattern, Pre Assembled Control Valve and Lava Granules Fire Media Included in Black
21222324252627282930
28
INSTALLATION (cont.)
FIRST place the right front log piece (log #2)
as shown. The holes found on the underside of
the log should align over the pegs found on the
burner. ENSURE THE LOG RESTS FLAT ON THE
BURNER.
NEXT place the right top log (log #3) as shown. The
log should lock in place over the rear log.
2A
1
Place the rear log (log #1) as shown. The holes
found on the underside of the log should align over
the pegs found on the burner. ENSURE THE LOG
RESTS FLAT ON THE BURNER.
FTSO-24 Placement
The underside of the bottom logs have holes that align over pegs found on the burner. THE BOTTOM LOGS
MUST BE FULLY SEATED ON THE BURNER. Certain logs have notches on them to allow for the logs to
interlock in place.
3
Place the middle log (log #4) as shown. It should
lock in place on the burner and over the rear log.
Place the left front log piece (log #2) as shown. The
holes found on the underside of the log should align
over the pegs found on the burner. ENSURE THE
LOG RESTS FLAT ON THE BURNER.
4
2B
REST MIDDLE
LOG IN BRACKET
ON BURNER