Manualshelf

Spec Sheet 1

ManualsBrandsReal Fyre ManualsFireplace/Gas Stove AccessoriesVent-Free Collection G19A-24/30-01V 24" and 30" Unvented Burner System with Clean Dazzling Flame Pattern, Pre Assembled Control Valve and Lava Granules Fire Media Included in Black
21222324252627282930
26
FTO-24 Placement
The underside of the bottom logs have holes that align over pegs found on the burner. THE BOTTOM LOGS
MUST BE FULLY SEATED ON THE BURNER. Certain logs have notches on them to allow for the logs to
interlock in place.
3
2B
INSTALLATION (cont.)
Place the rear log (log #1) as shown. The holes found
on the underside of the log should align over the pegs
found on the burner. ENSURE THE LOG RESTS FLAT
ON THE BURNER.
Place the right front log piece (log #2) as shown.
The holes found on the underside of the log should
align over the pegs found on the burner. ENSURE
THE LOG RESTS FLAT ON THE BURNER.
Place the left front log piece (log #2) as shown. The
holes found on the underside of the log should align
over the pegs found on the burner. ENSURE THE
LOG RESTS FLAT ON THE BURNER.
Place the middle log (log #3) as shown. It should
lock in place on the burner and over the rear log.
1
REST MIDDLE
LOG IN BRACKET
ON BURNER
2A