Spec Sheet 1
15
REMOTE OPERATING INSTRUCTIONS
ROOM
SET
73
F°
80
F°
TIMER
Fig. 15-3 Flame height detail
Set desired
flame level
1 - 5
ROOM
SET
20
e°
80
F°
TIMER
Fig. 15-4 Timer detail
Set
desired
time
ORIENTATION
Prior to remote transmitter use, light the appliance per the
REMOTE LIGHTING section. The remote will only operate
the burner system in remote mode. Familiarize yourself with
the transmitter keys and display, as illustrated in Fig. 15-1
and Fig. 15-2.
Identify the four transmitter keys:
• ON/OFF KEYS: These keys turn the system ON or OFF.
• HI/LO KEY: This key, when the system is on, is used to
set the desired flame height via the Flame Height mode.
• TIMER KEY: This key, when the system is on, is used to
set the desired time via the Timer mode.
• UP/DOWN KEYS: In Flame Height or Timer mode, the
ON/OFF keys become UP/DOWN keys to increase or
decrease the Flame Height or Timer amount.
The display will show all active icons on the screen.
FLAME HEIGHT
Five flame height levels are available. Press the HI/LO key to
enter the Flame Height mode. A number 1 - 5 will be displayed
at the bottom of the screen. Pressing the Up/Down keys once
will increase/decrease the flame height by 1 of 5 increments.
See Fig. 15-3.
TIMER
In Timer Mode, the unit will remain functioning until the set
amount of time has expired. Press the Timer key to enter the
Timer mode. Pressing the Up/Down keys once in this mode will
increase/decrease the set time in increments of 10 minutes.
See Fig. 15-4.
To turn off the timer mode press the OFF key. This will turn
off the unit.
TEMPERATURE INDICATOR ( ˚F or ˚C)
The temperature can be displayed in °F or °C. When you first
install the batteries, the temp indicator at the top of the screen
will be flashing. Use the Up/Down keys to switch between °F
or °C.
ROOM
20
88
F°
TIMER
Fig. 15-2 Remote display detail
Flame Height
/ Timer
detail
Flame icon
indicates
system is in
operation
Room
temperature
Transmission
OFF
ON
AUTO
ON
OFF
HI/LO
TIMER
OFF/DOWN
key
ON/UP
key
HI/LO key
(Display
screen)
Timer
key
Fig. 15-1 Remote transmitter detail