Manualshelf

Spec Sheet 1

ManualsBrandsReal Fyre ManualsFireplace/Gas Stove AccessoriesVent-Free Collection ECV-2-24 24" Evening Fyre Charred See Thru Logs with Variable Flame Height Remote, On/Off Remote with Standing Pilot and 25,000 to 38,000 BTUS in Brown
123456
5
EVENING FYRE & EVENING FYRE CHARRED LOG PLACEMENT INSTRUCTIONS (24" & 30" MODELS)
The underside of the bottom logs have cutouts and tabs that align over the burner. THE BOTTOM LOGS
MUST BE FULLY SEATED ON THE BURNER. Certain logs have notches on them to allow for the logs to
interlock in place.
All items for this log set are included in one (1) box.
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
1
2
Logs snug against bracket
3
4
Align
notch
with
bracket
Align tabs
with holes
III
III
IV
Place the rear log (log #1) as shown. Slide it forward on the
burner, against the main burner bracket. ENSURE THE LOG
RESTS FLAT ON THE BURNER, AND THAT THE LEFT
BURNER BRACKET ALIGNS WITH THE GROOVE FOUND
ON THE FACE OF THE LOG.
Place the front log (log #2) as shown. The underside of the
log has two tabs that insert into the holes found on the burner.
ENSURE THE LOG RESTS FLAT ON THE BURNER.
Ensure the rear and front logs are snug up against the main
burner bracket.
Place the left middle log (log #3) as shown. The log should
lock in place over the logs below.
Place the center middle log (log #4) as shown. The log should
lock in place over the logs below.
E(F,C)V-24 & E(F,C)V-30
PARTS LIST
EFV-24 log set shown
1
2
4
3
5
6
24" - EFVL-20BR-1
24" - ECVL-20BR
30" - EFVL-24BR-1
30" - ECVL-24BR
24" - E(F,C)VL-24BF-2
30" - E(F,C)VL-30BF-2
E(F,C)VL-12T
E(F,C)VL-10T
E(F,C)VL-13T
7
E(F,C)VL-13TY
E(F,C)VL-11TR
8
24" - CHK-6
30" - CHK-8
9
24" - CHK-7
30" - CHK-9