Manualshelf

Spec Sheet 1

ManualsBrandsReal Fyre ManualsFireplace/Gas Stove AccessoriesVent-Free Collection CHASL-16/18BF 16" and 18" Charred Aged Split Bottom Front Gas Oak Logs with Steel Rods Inserted, Radiant Heat and Authentic Wood Look in Charcoal Color
123456
3
CHARRED FRONTIER OAK & CHARRED AGE SPLIT LOG PLACEMENT INSTRUCTIONS (16/18" MODEL)
III
I
II
CH(FR,AS)-16/18
PARTS LIST
All items for this log set are included in one (1) box.
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
1
2
CH(FR,AS)L-15BR
CH(FR,AS)L-16/18BF
3
CH(FR,AS)L-6TC
4
5
CH(FR,AS)L-9TR
CH(FR,AS)L-11TL
Place the rear log (log #1) as shown. Slide it forward
on the grate, against the main burner bracket. The
cutouts found on the underside of the log should
align over the grate fi ngers. ENSURE THE LOG
RESTS FLAT ON THE BURNER/GRATE.
2
Place the front log (log #2) as shown. Slide it back
on the grate, against the main burner bracket. The
cutouts found on the underside of the log should
align over the grate fi ngers. ENSURE THE LOG
RESTS FLAT ON THE BURNER/GRATE.
Ensure the rear and front logs are snug up against
the main burner bracket.
1
Logs snug against bracket
The underside of the bottom logs have cutouts and tabs that align over the burner. THE BOTTOM LOGS
MUST BE FULLY SEATED ON THE BURNER. Certain logs have notches on them to allow for the logs to
interlock in place.
CHFR-16/18 log set shown
Select G10 burner systems include a
decorative wood chip. If equipped, refer
to the INSTALLATION section of the main
owner’s manual supplied with the burner for
placement.