Spec Sheet 1

2
L-A2-443
REV 2 - 1904241035
Note: The conditions/environment of each setup will slightly vary.
After installation of your unit is complete, follow the LIGHTING
INSTRUCTIONS section to light the burner. The burner
system will reach optimal performance and appearance after
approximately 20 minutes.
CAUTION: Burn hazard! Logs will remain hot for some time after use.
If you need to reposition any log to maintain the proper layout,
use heat resistant gloves or allow logs adequate time to cool
before handling.
Failure to use a Peterson G52 burner may result in a DANGEROUS
situation and in property damage, personal injury or even death; will void
listings and certifi cations; and will void any insurance coverage by R.H.
Peterson Co. or our insurers.
WARNING: This gas log set is for use with an R.H. Peterson Co. G52
burner (and parts) ONLY.