User manual

• Easy setup and use. Simply plug it in and go!

• Simulate sophisticated computer radios. The InterLink Elite, used in conjunction

with the RealFlight software, allows you to simulate the programmability (mixing,

exponential, etc.) of sophisticated computer radios.

Start Flying!

When you start RealFlight for the first time, the software will automatically detect the

InterLink Elite controller. When you close the Welcome Screen, simply add throttle

and start flying right away.

RealFlight, by default, uses the InterLink Joystick setting. This setting affords

RealFlight 6.5 the plug-and-play capability in the simulation. In this mode, the

InterLink Elite controls all functions associated with the flight of your aircraft.

The InterLink Elite also allows you to use your own R/C transmitter to control the

RealFlight aircraft. This is referred to as the Transmitter Interface Mode.

QuickSelect-

The InterLink Elite also offers QuickSelect buttons located at the bottom of the

controller. These buttons allow you to make simple changes to the simulator without

having to put the controller down and reach for the keyboard or mouse. This makes it

convenient to change the current aircraft and airport, or display popular on-screen

gadgets.

To access the QuickSelect tabs, press the Menu/Select button to display a number of

tabs along the left side of the simulator. Use the Up and Down direction on the Data

Lever, located on the lower right side of the controller, to scroll through these options.

Pressing the Menu/Select button again will select the highlighted tab. Pressing the

Cancel button on the InterLink Elite will exit out of the tabs and hide them.

Select Scenario

Select Aircraft

Select Airport

NavGuides Gadget