User manual

22
simulation using the newly selected aircraft. Further instructions can be found on page
102.
If you wish to exit the Aircraft Selection screen without making any changes, simply
press the Reset button on the InterLink Elite.
Aircraft Most Recently Used List (MRU)-
If you have selected any different aircraft previously, you will note that these aircraft
appear on a list in the Aircraft menu; as shown below. This list is at the very bottom of
the menu. This list is commonly referred to as a Most Recently Used, or MRU list. It
is limited to the eight most recently used aircraft. If you wish to fly one of the aircraft
from this list, simply click on the name of the aircraft in the MRU list.
Airport Selection-
Changing flying sites uses a process similar to selecting an aircraft. To select a new
flying location, click the Environment menu title. Next, click the Select Airport…
menu item found in the drop-down menu. This opens the Select Airport dialog. All
the airports in RealFlight 6.5 are initially grouped by their respective location or scene:
Archipelago, Flatlands, PhotoFields, or Sierra Nevada.