User manual

21
Each aircraft available in RealFlight 6.5 is listed along the left-hand side. The icon next
to each name differs depending on whether the model is an airplane or a helicopter.
To select an aircraft from the list, click on the desired aircraft. The selected model will
now appear in the ReadySelect™ preview box. Additionally, the aircraft’s description
and information data will appear in the aircraft information pane, which appears just
below the ReadySelect preview window.
When you are satisfied with your selection, click OK to return to the simulator using
the newly selected aircraft.
Complete information pertaining to the Select Aircraft… menu item is available in
Chapter 6 of this manual, The Aircraft Menu.
Alternatively, you may use the InterLink Elite controller to change aircraft selections.
(This feature is not available with the InterLink Plus controller.) Simply press the
Menu/Select button located on the front of the InterLink Elite controller. This will
bring forth the QuickSelect tabs on the left side of the computer screen and the aircraft
selection tab, represented as an airplane icon, should be the highlighted tab. Press the
Menu/Select button once again to bring up the QuickSelect Aircraft Selection dialog
box. Move the Data Lever, found on the lower right side of the InterLink Elite
controller, up or down to view the available aircraft. To select an aircraft, simply
highlight the name and press the Menu/Select button. You will return to the