User manual

14
2. Shortly after plugging in the InterLink controller, a dialog box should
appear on the screen indicating that Windows has located a new device
and will then automatically install the necessary drivers.
Please note: It is possible that Windows will need to install the appropriate files
for the InterLink Elite controller to function properly. Please have your
Windows disc available in case it is required.
Starting RealFlight 6.5-
1. Double-click the RealFlight 6.5 Launcher located on your desktop.
2. Type the software serial number and the InterLink controller
serial number in the appropriate location. Please be sure to enter the
numbers exactly as they appear. Also note, you will need to input your
InterLink controller serial number, including the middle digits located
between the hyphens. Failure to enter the serial numbers correctly will
not allow you to proceed to the next step. Once the serial numbers
are entered properly, you will see that the OK button will now become
active and allow you to continue.