User manual

160
Select Controller
When you click on the Select Controller menu item, the following sub-menu appears:
To choose the method of control, click on the Select Controller menu item from the
Controller menu. The selection(s) will vary depending on whether or not you have
attached an actual R/C transmitter to the interface adapter for the InterLink Elite.
Please note: If you have attached a controller to the InterLink Elite’s interface port,
RealFlight will pause briefly while it detects the transmitter.
The selections are (usually) InterLink Elite and InterLink Elite Transmitter X Channel.
If you will be using your own controller in the simulation, choose the InterLink Elite
Transmitter X Channel. The sections that follow will explain the differences
between the various modes, the methods of control, and the means and ways to access
and utilize them.
If you have attached a Generation 2 InterLink controller or a G3 InterLink Plus
controller in addition to the InterLink Elite, there will be an option allowing you to
select amongst these controllers as well.