Instructions / Assembly

GROUNDED PLUG
This replace is equipped with a grounded plug. Do not modify this plug in any manner. It should only be
installed into a 3-pronged and grounded outlet. A power strip or electrical cord should never be used.
A 15-Amp, 120-Volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the item will be on a
dedicated circuit as other replaces on the same circuit may cause the circuit breaker to trip or the fuse to blow
when the replace is in operation. The unit comes standard with a 6ft (1.8m) long three wire cord, exiting the
right side of the item. Always plug the unit into a wall outlet/receptacle. An extension cord or re-locatable power
tap, (outlet/power strip), should not be used.
Electrical outlet wiring must comply with local building codes and other
applicable regulations to reduce the risk of re, electrical shock, injury or
death.
Do not use this item if any part of it has been under water. Immediately
call a qualied service technician to inspect the item and replace any
part of the electrical system which has been under water.
Safety Information (continued)