User guide

Rack information C–33
Hitachi Unified Storage VM Block Module Hardware User Guide
To install the stabilizer plate:
1. Remove the trim cover plate from bottom of bezel and set it aside for
reinstallation later.
2. Unpack the stabilizer plate kit.
3. Place the stabilizer plate as shown to mate with bracket at the bottom
of the frame. Using the washers, M8 screws, and tool in the kit, secure
the plate to the frame.
Figure C-18: Installing and Uninstalling the Anti-Tip Stabilizing Plate
Figure C-19: Installing and Uninstalling the Anti-Tip Stabilizing Plate (2)