Installation manual

52 |
Software setup | HDS Gen3 Installation Manual
Remote updating is similar to updating a local display; select the
 le on the microSD card and select ‘Upgrade’ option, followed by
‘Remote Upgrade’. Follow the onscreen options.
NMEA 2000 and Ethernet device upgrades
The update  le must be loaded to the root directory of an microSD
card.
To update NMEA 2000 and ethernet devices select the ‘upgrade’
option presented when the  le is highlighted. A list should appear
displaying any compatible devices the update  le applies to - in
most cases this will be a single device. Select device and initiate
upgrade. Do not interrupt the upgrade process.
 Note: If no device is shown, check that the device to be updated has
power, and run any outstanding updates for the display  rst.