User guide

22
 Enable WEB Server Access on WAN: Allows web server access from outside the local
network.
 Enable IGMP proxy: The IGMP Proxy is used to monitor IGMP traffic between hosts and
routers. By creating a multicast routing table, the IGMP proxy can improve the efficiency
of network traffic.
 Enable PPTP pass through: Allows PPTP packets to pass from the router to the WAN.
 Enable IPsec Pass through: IP Sec allows packets to pass from the router from the WAN.
 Enable L2TP pass through: Allows L2TP packets to pass from the router to the WAN.
 Port loopback: Loop is used mainly used in IP management with some of the procedures,
such as IPSEC tunnel because you need a combined ID or IP, routing.
 NAT Fast Forward: Quickly to the private address of the "internal" network through the
router's IP address into a valid forwarding to the outside.
4.4.3 Upload/Download Bandwidth
Here you can display the traffic status of the wireless router.
4.5 LAN
4.5.1 LAN
Configure the LAN (Local Area Network) parameters. These affect both the 4-Ethernet ports
and the wireless clients accessing the router. The LAN settings include: IP address, subnet mask,,
DHCP range and other advanced options.