User guide

19
 Enable WDS: Enables WDS function.
 MAC Address: The MAC address of each Access Point you with to add to the network must
be entered individually to this list.
 Data Rate: Sets the transmission speed.
 Comment: Adding strategy to the current logo.
4.3.6 WPS
WPS (Wi-Fi Protected Setup) is a Wi-Fi Alliance security standard and was introduced to simplify
encrypted setup of 802.11 wireless network devices. A WPS push-button is provided on each
WPS enabled device. The user can add one or more WPS devices to a wireless network by
simply pressing the WPS button on the router and then on the wireless device to be added to the
network. This process will exchange information between the router and the wireless device to
link them together and also sets up a secure link between them.