User Manual

www.ReadyLIFT.com - Phone: [phone]
Installation Instructions 49-6407
9
The install is complete and the VEHICLE MUST BE ALIGNED and brakes checked before driving.
49.
Install the extended rear 11” sway bar end links and Relocation Bracket L & R with
Supplied hardware. The heads of the bolts should face to the inside of the vehicle.
45.
Install the extended rear shocks.
( Max length on shocks is 26.5 inch’s Extended)
46.
Make sure to tighten all jam nuts on the upper and lower arms on the
front and the rear of the vehicle including tracking bars.
47.
Re-check that all parts were installed properly and tightened. Put the tires on
and lower the vehicle to the ground. Loosen and retighten the front
upper arms to allow upper arm to settle into ride position.
48.
Install the
sway bar
end links
to the
inside of
the bar.