User Manual

www.ReadyLIFT.com - Phone: [phone]
Installation Instructions 49-6407
8
Unbolt the brake line brackets from the frame and install the
brake line drop brackets with supplied hardware.
41.
Install rear track bar extension bracket with provided hardware
and spacers.
42.
Install the new track bar into the frame pocket and axle mount.
43.
Re-install the brake calipers and torque.
44.
Install new bump with supplied hardware.
Bump stop pad should be leaning towards front of vehicle.
39.
Install new coil with factory rubber boot on top.
40.
Unbolt both rear upper arms and remove from vehicle.
37.
Install the new rear upper arms. Adjustable ends should be
installed on frame side and the zerk fittings up on axle side.
38.