User Manual

www.ReadyLIFT.com - Phone: [phone]
Installation Instructions 49-6407
7
Remove ABS line clips from holes in rear axle. Put the back clip into the
front hole.
33.
Lower the rear axle and remove the springs.
34.
Unbolt the rear lower arms and remove.
35.
Install new lower arms and tighten down. The adjustable end
should be installed on axle side.
36.
Unbolt and remove rear brake caliper and hang caliper out of the way.
31.
Remove the rear shocks.
32.
Unbolt and remove the rear track bar. Support the rear axle.
29.
Unbolt the rear sway bar end links and remove.
30.