User Manual

www.ReadyLIFT.com - Phone: [phone]
Installation Instructions 49-6407
4
Unhook the differential vent line from the frame.
9.
Unbolt the tie-rod from the spindle.
10.
Mark drive shaft for re-alignment during reassembly. Unbolt
the drive shaft from the front differential.
11.
Lower the axle and remove the coil springs.
12.
Unbolt and dislodge the brake line brackets from the axle.
7.
Remove the stock shocks off of the vehicle (front & rear).
8.
Next, unbolt the track bar from the axle and remove from vehicle.
5.
Unbolt and remove the sway bar end links from vehicle.
6.