User Manual
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 49-6407
3
Allhardwareisofthehighestgradeandthecomponentsaremanufacturedtoexactingspecificationsforatroublefreeinstallation.
Bill of Materials
Read all instructions first.
1.
Lift the vehicle and remove the tires. Support the axles.
2.
With the vehicle properly supported locate the front track bar.
3.
Remove the track bar from the frame.
4.
DESCRIPTION
QTY
Short Arm Lower Front (L&R) w/Badges
2
Short Arm Upper Front
2
Short Arm Lower Rear (L&R) w/Badges
2
Short Arm Upper Rear (L&R)
2
Front Spring
2
Rear Spring
2
4" Front Bump Stop
2
4" Rear Bumpstop Bracket
2
Swaybar End Link, 10"
2
Swaybar End Link, 11"
2
Rear Sway Bar Drop Brackets
2
Rear Track Bar Drop Down Bracket Kit
1
Front Brake Lines - 35" (L&R)
2
JK Front Brake Line Bracket
2
JK Rear Brake Line Bracket
2
DESCRIPTION
QTY
JK Rear Brake Line Drop Bracket
1
Bolt, 1/2"- 13 x 1.25
2
Bolt, 1/2"-13 x 2.50
6
Bolt, 1/2-13 x 2.75
2
Bolt, M10-1.25x60mm
2
Bolt, M6-1.0x20mm
4
Bolt, M8-1.25x20mm
4
Nut, 1/2"-13 Nyloc
10
Nut, M10x1.5 Flange
2
Nut, M6-1.0
4
Nut, M8-1.25 Flange
4
Washer, 1/2" AN Style
16
Washer, 1/2" Flat
4
Washer, M6 Flat
8
Washer, M8 Flat
8
IMPORTANT
ReadyLIFT® Off Road Arms/Links come preset to
length but may need to be adjusted per application for
alignment reasons and/or to eliminate possible tire rub.
It is the installers responsibility to insure the correct
length shocks are installed and drive lines are smooth
and free of any binding. Note: This kit REQUIRES ad-
justable front and rear track bars. We recommend RL
part numbers; 77-6000 and 77-6001 or 77-6002 and
77-6003.