Instruction Manual

Recheck all work performed, torque hardware and
lower vehicle to ground and test drive.
www.ReadyLIFT.com
Phone [phone]
Installation Instructions (66-3002, 66-3003, 66-3051, 66-3052)
Place new block into position (1.0” block shown) Shown (3.0” block) replacing factory block on 4WD models
Raise axle and center locating pin on leaf pack. Note: taper Place u-bolts over saddle on leaf pack and over axle
Reinstall axle mounting plate Install new hardware
Tighten hardware and reinstall lower shock into mount
Front of vehicle