User Manual

Reconnect rear shocks and sway bar end links,
Reattach all brackets and ABS lines in there origi-
nal locations and recheck all work. Replace
wheels/tires lower vehicle and torque to spec.
Test drive and have vehicle aligned.
www.ReadyLIFT.com
Phone [phone]
Installation Instructions (69-3010 & 69-3015)
On the driver side frame unbolt e-brake hanger Support axle with jack and disconnect sway bar end links
Disconnect Lower shock mounts Carefully lower axle and remove coil springs and isolators
Place ReadyLIFT spacer on axle mount Refit OE rubber isolator on top of billet spacer
Reinstall coil spring and seat on top of spacer, raise axle.