Manual

Reconnect rear shocks and sway bar end
links, Reattach all brackets and ABS lines in
there original locations and recheck all work.
Replace wheels/tires lower vehicle and torque
to spec. Test drive vehicle.
www.ReadyLIFT.com
Phone [phone]
Installation Instructions (69-3005)
Support axle with jack and disconnect sway bar end links Disconnect Lower shock mounts
Carefully lower axle and remove coil springs and isolators Place ReadyLIFT spacer on axle mount
Refit OE rubber isolator on top of billet spacer Reinstall coil spring and seat on top of spacer, raise axle.