Manual

Reinstall wheels/tires and torque. Recheck all
work performed and test drive vehicle. Note:
Initial height can now be set. Final adjust-
ments of the torsion bars may, and should be
performed by the alignment shop.
www.ReadyLIFT.com
Phone [phone]
Installation Instructions (69-3005)
Install new ReadyLIFT forged torsion key in same position. Reinstall tool and adjust upward enough to insert adj. block
Install new adj. bolt and make bolt flush with cross-member 66-3000 Install front lower shock extensions and hardware
66-3050 shock extensions will replace the OE brackets Install new extension bracket with OE bolts as shown
Rear Instructions to follow: