User Manual

.
Torque all hardware to factory spec
and recheck to ensure there is proper
clearance and slack for ABS lines to
travel through entire suspension range.
Reinstall and torque wheels and tires,
test drive and have vehicle aligned.
www.ReadyLIFT.com
Phone [phone]
Installation Instructions (69-1035)
Install and tighten new upper shock extension Reuse OE bushings and hardware top and bottom.
Attach new bump stop and bracket to frame as pictured Note: pass/dr side brackets are specific. Tighten once aligned
Picture shows inner frame bracket and hardware installed. Reconnect ABS lines.