How to Guide

FAQs
What temperature restrictions does Ready Seal have? There are no temperature restrictions. Ready Seal
can be applied in any temperature, as well as in direct sunlight.
Can I stain today if it’s supposed to rain tomorrow? As long as the Wood Prep and Moisture Content rules
outlined above are followed (wood is clean, bare, and dry down to 12% or less), you can stain today, and it
can rain within hours and the Ready Seal will not wash away.
Should I sand the wood before I apply Ready Seal? It is not recommended to sand the wood before
application. Ready Seal is a penetrating stain that absorbs down into the wood pores. Sanding closes those
wood pores, meaning the product has less room to get into the wood. If you sand the wood, be aware that
you will likely only get one light coat of product to go in. You can follow the Two Coat Verification Test
Method above to see if it will take a second coat.
Where can I buy Ready Seal? Ready Seal is only sold through our distributors, and you can see if there are
any in your area at https://www.readyseal.com/find-a-store/. If there is no one in your area, you can
order online from various paint and hardware retailers for shipment to your home. You can also call our
office if you need help finding a source. 1-888-782-4648
Can I use Ready Seal on a log home? Yes- absolutely! Many customers have been very pleased with Ready
Seal on their log homes. Please call our office for specific guidance on this particular application, as there
are some nuances to the wood prep.
How long does Ready Seal take to dry? And when can I walk on it? You can walk on the deck while you are
staining- it absorbs into the wood, self-levels, and there is no risk of leaving footprints on it. But you may get
product on your shoes, so don’t track it into your home or onto the surrounding concrete/stone. If the
Wood Prep and Moisture Content protocols outlined above are followed, the wood will dry quickly (within
hours), and you can replace furniture right away, but wait a couple days before adding any textiles (rugs,
pillows, etc). Once it is dry, it will take up to 14 days to fully cure and reach its final tone.
My deck still looks wet and oily after it was stained 3 days ago, what should I do? This may indicate that
the wood is saturated, and it has absorbed all the product that it can. In this case, you can take a rag with
some mineral spirits on it and wipe down the surface. This will absorb up any excess oils and pigment, but
will not affect the product that has absorbed into the wood.
Can I use Ready Seal on interior projects? Yes! Please call our office to get information on your specific
application, and we are happy to provide guidance.
Is Ready Seal safe to use on picnic tables or kids’ swing sets? Ready Seal has no carcinogens, and when it
dries, your substrate (e.g. picnic table, children’s play set, outdoor furniture) will be suitable of normal use.
How do I clean my brush/roller/sprayer after I finish application? Mineral spirits or paint thinner will clean
tools.
Where can I see photos of Ready Seal on actual projects? Visit our onl
ine photo gallery HERE.