Use and Care Manual
Table Of Contents
- Preparation & 12% Moisture Content are #1 Imperative for success!
- See Delmhorst J-Lite Spec Sheet Attached! We no longer market this quality unit, but this unit is indicative of a PIN TYPE Moisture Meter. Homeowner versions are available @ Lowe's, Home Depot, Amazon & Other Suppliers!
- This Warranty is on the label of all Ready Seal Products.
- Ready Seal Interior Stain Prep & Application:
- The Following Narratives Should Answer Most Of Your Questions. If you need additional technical support, PLEASE contact us @ 888-782-4648!
- Preparation & 12% Moisture Content are #1 Imperatives for success!
- See Before and after photos of a cedar deck that was cleaned properly then stained with Natural Cedar. See Link Below!
- Double Click & Scroll to #9 Photo: Click On Photo To Bring Up Slide Show Format!
- Aged Substrate Preparation:
- New Deck vs. Old Deck:
- Two Coat Verification Test Method:
- Ready Seal Coverage Formula Example For Deck:
- Log Homes & Siding:
- For Fences & Other Applications, See Narratives Below.
- Moisture Content:
- Horizontal Substrates:
- The Ready Seal® Application Advantage
- Ready Seal® Stain and Sealer for Wood:
- The Ready Seal® Maintenance Advantage
- Ready Seal® Maintenance Process
New Logs or new construction will not require the following Prep! New smooth milled substrate materials will only take one light
coat!
•
For good penetration, sand floors, cabinets, furniture or other applications so that all existing finishes have been totally
removed and to a desired smoothness!
•
Apply a paste wood filler into all open nail holes & cracks of Oak & Pine Materials. To dry, wipe with a dry cloth or use
saw as an absorbent, then vacuum residual. This process is not necessary for Maple or Birch since they are closed grain
materials.
•
Before staining, apply a small amount of
Ready Seal in an inconspicuous area to
assure desired color.
•
Apply Ready Seal allowing penetration timeline for desired color, then wipe excess away.
•
A sealing varnish can be applied while Ready Seal is still wet or dry. Flooring Should
Have 2 Day Penetration Timeline Before Sealing!
•
It’s Easy & It’s Goof Proof!
The Following Narratives Should Answer Most Of Your Questions. If you need additional technical support, PLEASE contact us @
888-782-4648!
Why Ready Seal?
•
Penetrating Wood Stain and Sealer.
•
Protects - Moisture cannot get under our product and into the wood.
•
No laps, runs or streaks.
•
No cracking, chipping, flaking or peeling.
•
Mildew resistant.
•
Dries to a durable, flat, natural finish.
•
Dries to the touch in minutes, not hours.
•
Contains no linseed or vegetable oils that promote algae and fungus growth in wood.
•
Can be applied to all types of wood with both rough and smooth surfaces.
•
Can be applied wet-on-wet OR wet-on-dry with no lapping.
•
Can be applied at any temperature.
•
Can be applied in the sun.
•
Can withstand rain within minutes of application.
•
Easy to apply – can be applied with a simple garden sprayer, a roller or a brush.
•
No mixing or stirring required during application of the product.
•
No back brushing required.
•
Easy maintenance – no sanding or stripping required for reapplication.
•
Low odor.
•
Lowest VOC compound in the market.
•
Ultimate UV protection.
Preparation & 12% Moisture Content are #1 Imperatives for success!