MSDS

COMPANY IDENTITY: READY SEAL, INC. DATE: 03/02/2015
PRODUCT IDENTITY: READY SEAL EXTERIOR WOOD STAIN PAGE: Page 6 of 8
SECTION 9 - PHYSICAL & CHEMICAL PROPERTIES
APPEARANCE: Liquid, Water-White
ODOR: None
ODOR THRESHOLD: Not Available
pH (Neutrality): Not Applicable
MELTING POINT / FREEZING POINT: Not Available
BOILING RANGE (IBP, 50%, Dry Point): Not Applicable
FLASH POINT (TEST METHOD): 74° (Closed Cup)
EVAPORATION RATE (n-BUTYL ACETATE=1): Not Applicable
FLAMMABILITY CLASSIFICATION: Non-Combustible
LOWER FLAMMABLE LIMIT IN AIR (% by vol): Not Applicable
UPPER FLAMMABLE LIMIT IN AIR (% by vol): Not Available
VAPOR PRESSURE (mm of Hg) @ 20 C: 0.0
VAPOR DENSITY (air = 1): Not Applicable
VOLATILE ORGANIC COMPOUNDS (VOCs): < 100 g/L
GRAVITY @ 68/68F / 20/20C:
SPECIFIC GRAVITY (Water = 1): 0.870
POUNDS / GALLON: 7.247
WATER SOLUBILITY: Negligible
PARTITION COEFFECIENT (n-Octane / Water): Not Available
AUTO IGNITION TEMPERATURE: Not Applicable
DECOMPOSITION TEMPERATURE: Not Available
SECTION 10 - STABILITY & REACTIVITY
STABILITY
Stable under normal conditions.
CONDITIONS TO AVOID
Isolate from extreme heat and open flame.
MATERIALS TO AVOID
Isolate from oxidizers.
HAZARDOUS DECOMPOSITION PRODUCTS
Carbon Oxides from heating.
HAZARDOUS POLYMERIZATION
Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
ACUTE HAZARDS
EYE & SKIN CONTACT:
Primary irritation to skin, defatting, dermatitis.
Primary irritation to eyes, redness, tearing, blurred vision.
Liquid can cause eye irritation. Wash thoroughly after handling.
INHALATION:
May cause severe irritation with possible lung damage.
SWALLOWING:
Swallowing can cause abdominal irritation, nausea, vomiting & diarrhea.